How to maintain and extend the service life of a dredging rubber hose

Nov 09, 2026

View: 7

Leave a message

The dredging hose is a consumable item, but proper use and regular maintenance can significantly reduce the replacement cost.
Before use: Check if the outer rubber is bulging, cracked, or has delamination at the flange position, and whether the flange sealing surface is flat;
During use: Do not operate under long-term overpressure or overnegative pressure conditions, and avoid sudden start-stop impacts; Try to control the bending radius, as anything larger than the minimum bending radius will cause damage to the internal steel wire core; Avoid direct impact of sharp stones on the hose body;
After use: Drain the mud and water in the hose, rinse the inside with clean water, and reduce the long-term residual wear of the inner lining by removing hard particles;
Storage: After emptying the medium, roll it loosely, place it in a cool, dark warehouse, away from direct sunlight, ozone, and heat sources, and do not apply heavy pressure or stack it;
If the inner lining is worn through, the outer wall is cracked, or the root of the flange has blistering and detachment, it must be immediately stopped and replaced to prevent construction pipe burst and loss of work.

Send Inquiry